Custom Industrial Parts Heavy Equipment Parts Custom Fasteners Bearings Power Transmission Coupling & Drives Linear Motion Maintenance Products
Project Description

Solid Dowel pin and extractable Dowel Pins

Dowel pada umumnya berbentuk solid dan memiliki ukuran finish yang presisi.

Dowel pin /pin pasak berfungsi untuk memegang komponen lain sehingga tetap dalam posisinya.

 

Standard material kami

              - Stainless steel A2/ 304

              - Stainless steel A4/ 316

              - Mild steel (no hardened)

              - Mild steel (hardened) sesuai standard ISO dan DIN

 

Standard ukuran acuan: metric dan imperial (inch)

Standard & custom tersedia

 

Apa yang dapat kami custom?

- Desain (polos/dengan ulir/dengan pengunci/dengan groove, dll)

- Ukuran (max. dia.100mm)

- Material dan pemrosesan (S45C/AISI4140/AISI4340/duplex/super duplex/Inconel/monel 500 dll tersedia)

- Finishing (Zinc/Black oxide/ hardchrome plated)


Standard kami

Pin Dowel di produksi mengacu pada standar nasional atau international, masing-masing memiliki perbedaan pada chamfer, toleransi maupun material.
- DIN 6325—Through Hardened to Hrc 58-62 & Ground to m6 tolerance Steel.
- ISO 2338 (1998)— Mild Steel, Stainless Steel 303 or Stainless Steel 316 in m6 or h8 tolerance.
- ISO 8734—Type A is through hardened steel, ground to m6 tolerance. Type B is case hardened steel, ground to m6 tolerance. Type C is hardened, martensitic stainless steel.
- DIN 7—Mild Steel, Stainless Steel 303 or Stainless Steel 316 in m6 or h8 tolerance. Please note, the overall length is greater than the nominal length as dimension ‘C’ is not included.
- DIN 7979D—Extractable Dowel, Through Hardened to Hrc 58-62 & Ground to m6 tolerance.
- BS 1804 Part 1—Imperial solid dowels in steel, unhardened or case-hardened depending on diameter.
- BS 1804 Part 2—Metric solid dowels, available to order
- BS 1804 Part 3, Type B—Extractable Dowels and Taper Pins
- BS 7055—Equivalent to ISO 7834
- IS0 8733—Equivalent to DIN 7979A (unhardened)
- ISO 8735—Equivalent to DIN 7979D (hardened

Visit our blogspot for other reference : https://rtateknik.blogspot.com/

Contact Us

+6221 2258 5797
+6221 2258 4239
sales@rtateknik.com
Inlingua Building - Jl. Puri Indah Raya Blok A3/2 No. 33-35, Kembangan, Jakarta - Indonesia, 11610